Aczet
Touch Screen Micro Balance
Ultra Micro Balance & Micro Balance are the first choices for measuring the smallest sample quantities.
A Micro Balance consists of two components-one containing the electronics and the other, the precise mechanical measuring cell. This separation eliminates the effects of temperature and the influence it has on the performance of your Micro Ballance scale.
The Brilliant Mono-Tech
Unique & Unequalled high-end MONO-TECH technology sensor based on electromagnetic force compensation to match the highest international standards.
Maximum Repeatability and Adherence to USP
The best weighing accuracy and sd < 1d repeatability along with adherence to USP requirements (chapter 41 and 1251) set a new benchmark for mass measurement quality.
Infra Red Sensor
Thanks to infrared sensors, you can weigh without touching the balance, Everything is done automatically with a wave of your hand.
Specifications:
| Model | UCM 2A | CM 2A | CM 5A | CM 6A | CM 11A | CM 21A |
|---|---|---|---|---|---|---|
| Capacity | 2 g | 2 g | 5 g | 6.1 g | 11 g | 21 g |
| Minimum Load | 10 µg | 100 µg | 100 µg | 100 µg | 100 µg | 100 µg |
| Readability | 0.1 µg | 1 µg | 1 µg | 1 µg | 1 µg | 1 µg |
| Repeatability (+/-) | 0.4 µg | 1 µg | 1 µg | 1 µg | 1.5 µg | 1.5 µg |
| Linearity (+/-) | 1.5 µg |
2 µg (0-500 µg) 4 µg (2g) |
2 µg (0-500 µg) 4 µg (5g) |
2 µg (0-500 µg) 4 µg (6.1g) |
3 µg (0-500 µg) 6 µg (11g) |
3 µg (0-500 µg) 10 µg (21g) |
| Response time | 10-20 sec | 8-10 sec | 8-10 sec | 8-10 sec | 8-10 sec | 8-10 sec |
| Minimum sample wt (U=1% K=2) | 0.1 mg | 0.1 mg | 0.2 mg | 0.2 mg | 0.24 mg | 0.24 mg |
| Minimum sample wt (as per USP) | 1 mg | 1 mg | 2 mg | 2 mg | 2.4 mg | 2.4 mg |
| Pan size (mm) | 16 Ø | 15 Ø ~ 30 Ø | 15 Ø ~ 30 Ø | 15 Ø ~ 30 Ø | 15 Ø ~ 30 Ø | 15 Ø ~ 30 Ø |
* Performance Depending on the installation location and environmental conditions, the value could be higher.
Micro Balance
Micro Balances are the first choice for measuring the smallest sample quantities.
A Micro Balance consists of two components-one containing the electronics and the other, the precise mechanica measuring cell. This separation eliminates the effects of temperature and the influence it has on the performance of your Micro Balance scale.
The Brilliant Mono-Tech
Unique & Unequalled high-end MONO-TECH technology sensor based on electromagnetic force compensation to match the highest international standards.
Maximum Repeatability and Adherence to USP
The best weighing accuracy and sd < 1d repeatability along with adherence to USP requirements (chapter 41 and 1251) set a new benchmark for mass measurement quality.
Infra Red Sensor
Thanks to infrared sensors, you can weigh without touching the balance. Everything is done automatically with a wave of your hand.
Specifications:
| Model | CM 2 | CM 5 | CM 6 | CM 11 | CM 21 | CM 31 |
|---|---|---|---|---|---|---|
| Capacity | 2 g | 5 g | 6.1 g | 11 g | 21 g | 31 g |
| Minimum Load | 100 µg | 100 µg | 100 µg | 100 µg | 100 µg | 100 µg |
| Readability | 1 µg | 1 µg | 1 µg | 1 µg | 1 µg | 1 µg |
| Repeatability (+/-) | 1 µg | 1 µg | 1 µg | 1.5 µg | 1.5 µg | 2 µg |
| Linearity (+/-) |
2 µg (0-500 µg) 4 µg (2 g) |
2 µg (0-500 µg) 4 µg (5 g) |
2 µg (0-500 µg) 4 µg (6.1 g) |
3 µg (0-500 µg) 6 µg (11 g) |
3 µg (0-500 µg) 10 µg (21 g) |
3 µg (0-500 µg) 10 µg (31 g) |
| Response time | 8-10 sec | 8-10 sec | 8-10 sec | 8-10 sec | 8-10 sec | 8-10 sec |
| Minimum sample weight (U=1% K=2) | 0.1 mg | 0.2 mg | 0.2 mg | 0.24 mg | 0.24 mg | 0.24 mg |
| Minimum sample weight (as per USP) | 1 mg | 2 mg | 2 mg | 2.4 mg | 2.4 mg | 2.4 mg |
| Pan size (mm) | 15 Ø ~ 30 Ø | 15 Ø ~ 30 Ø | 15 Ø ~ 30 Ø | 15 Ø ~ 30 Ø | 15 Ø ~ 30 Ø | 15 Ø ~ 30 Ø |
* Performance Depending on the installation location and environmental conditions, the value could be higher.
Filter Micro Balance
Filter Micro Balances are the first choice of Emissions Testing Gravimetric Determination of Particulate Matter (PM).
A Filter Micro Balance consists of two components one containing the electronics and the other, the precise mechanical measuring cell. This separation eliminates the effects of temperature and the influence it has on the performance of your Micro Balance scale.
Specifications:
| Model | CM 2F | CM 5F | CM 6F | CM 11F |
|---|---|---|---|---|
| Capacity | 2 g | 5 g | 6.1 g | 11 g |
| Minimum Load | 100 µg | 100 µg | 100 µg | 100 µg |
| Readability | 1 µg | 1 µg | 1 µg | 1 µg |
| Repeatability (+/-) | 1 µg | 1 µg | 1 µg | 1.5 µg |
| Linearity (+/-) |
2 µg (0-500 µg) 4 µg (2 g) |
2 µg (0-500 µg) 4 µg (5 g) |
2 µg (0-500 µg) 4 µg (6.1 g) |
3 µg (0-500 µg) 6 µg (11 g) |
| Response time | 8-10 sec | 8-10 sec | 8-10 sec | 8-10 sec |
| Minimum sample weight (U=1% K=2) | 0.1 mg | 0.2 mg | 0.2 mg | 0.24 mg |
| Minimum sample weight (as per USP) | 1 mg | 2 mg | 2 mg | 2.4 mg |
| Pan size (mm) | 50 Ø | 50 Ø | 50 Ø | 50 Ø |
Semi Micro Balance
High PerformanceFast, stable results: Smart Grid, the new grid weighing pan speeds up your weighing process. The grid structure allows air turbulence to flow through the pan, reducing settling and stabilization times for faster results.
The Brilliant Mono-Tech
Unique & Unequalled high-end MONO-TECH technology sensor based on electromagnetic force compensation to match the highest international standards.
Maximum Repeatability and Adherence to USP
The best weighing accuracy and sd < 1d repeatability along with adherence to USP requirements (chapter 41 and 1251) set a new benchmark for mass measurement quality.
Efficient operation
The large LCD backlit display, push button keys easy access to the main functions make these balances easy to use.
High-Quality construction and solid performance ensure consistent and precise weighing results.
Specifications:
| Internal Calibration Model | Single Range | Dual Range | ||||||
|---|---|---|---|---|---|---|---|---|
| CY 65C | CY 85C | CY 205C | CY 225C | CY 265C | CY 285C | CY 165C | CY 255C | |
| Capacity | 60 g | 80 g | 200 g | 220 g | 60 / 220 g | 80 / 220 g | 100 / 160 g | 100 / 250 g |
| Minimum Load | 1 mg | 1 mg | 1 mg | 1 mg | 1 mg | 1 mg | 1 mg | 1 mg |
| Readability | 0.01 mg | 0.01 mg | 0.01 mg | 0.01 mg | 0.01 / 0.1 mg | 0.01 / 0.1 mg | 0.01 / 0.1 mg | 0.01 / 0.1 mg |
| Repeatability (+/-) | 0.02 mg | 0.02 mg | 0.03 mg | 0.03 mg | 0.02 / 0.1 mg | 0.02 / 0.1 mg | 0.02 / 0.1 mg | 0.02 / 0.1 mg |
| Linearity (+/-) | 0.04 mg | 0.04 mg | 0.07 mg | 0.07 mg | 0.04 / 0.2 mg | 0.04 / 0.2 mg | 0.05 / 0.2 mg | 0.05 / 0.2 mg |
| Response time | 5-8 sec | 5-8 sec | 5-8 sec | 5-8 sec | 5-8 sec | 5-8 sec | 5-8 sec | 5-8 sec |
| Minimum sample weight (U=1% K=2) | 2 mg | 2 mg | 2 mg | 2 mg | 2 mg | 2 mg | 2 mg | 2 mg |
| Minimum sample weight (as per USP) | 20 mg | 20 mg | 20 mg | 20 mg | 20 mg | 20 mg | 20 mg | 20 mg |
| Pan size (mm) | 80 Ø | 80 Ø | 80 Ø | 80 Ø | 80 Ø | 80 Ø | 80 Ø | 80 Ø |
Analytical Balance
The Brilliant Mono-Tech
Unique & Unequalled high-end MONO-TECH technology sensor based on electromagnetic force compensation to match the highest international standards.
Maximum Repeatability and Adherence to USP
The best weighing accuracy and sd < 1d repeatability along with adherence to USP requirements (chapter 41 and 1251) set a new benchmark for mass measurement quality.
Overload Protection
Capacity tracker built into display for easily monitoring possible overloads.
Leveling
Balances have adjustable feet for maintaining/providing uniform level.
Efficient operation
The large LCD backlit display, push button keys easy access to the main functions make these balances easy to use.
High-Quality construction and solid performance ensure consistent and precise weighing results.
Specifications:
| Internal Calibration Model | CY 64C | CY 124C | CY 224C | CY 304C | CY 324C | CY 404C |
|---|---|---|---|---|---|---|
| External Calibration Model | CY 64 | CY 124 | CY 224 | CY 304 | CY 324 | CY 404 |
| Capacity | 60 g | 120 g | 220 g | 300 g | 320 g | 400 g |
| Minimum Load | 10 mg | 10 mg | 10 mg | 10 mg | 10 mg | 10 mg |
| Readability | 0.1 mg | 0.1 mg | 0.1 mg | 0.1 mg | 0.1 mg | 0.1 mg |
| Repeatability (+/-) | 0.1 mg | 0.1 mg | 0.1 mg | 0.2 mg | 0.2 mg | 0.5 mg |
| Linearity (+/-) | 0.2 mg | 0.2 mg | 0.2 mg | 0.3 mg | 0.3 mg | 0.3 mg |
| Response time | 2-3 sec | 2-3 sec | 2-3 sec | 2-3 sec | 2-3 sec | 2-3 sec |
| Minimum sample weight (U=1% K=2) | 16 mg | 16 mg | 16 mg | 16 mg | 16 mg | 16 mg |
| Minimum sample weight (as per USP) | 160 mg | 160 mg | 160 mg | 160 mg | 160 mg | 160 mg |
| Pan size (mm) | 90 Ø | 90 Ø | 90 Ø | 90 Ø | 90 Ø | 90 Ø |
Statistical Data Printer CPR 02
Aczet CPR 02 Statistical Data Printer is a premium quality product from Aczet. Moglix is a well-known ecommerce platform for qualitative range of Dot Matrix Printer. All Aczet CPR 02 Statistical Data Printer are manufactured by using quality assured material and advanced techniques, which make them up to the standard in this highly challenging field. The materials utilized to manufacture Aczet CPR 02 Statistical Data Printer, are sourced from the most reliable and official vendors, chosen after performing detailed market surveys. Aczet products are widely acknowledged in the market for their high quality. We are dedicatedly involved in providing an excellent quality array of Aczet Dot Matrix Printer.
| Brand | Aczet |
|---|---|
| Function Type | Single Function |
| Item Code | CPR 02 |
| Paper Size | Width: 57.5 ± 0.5mm Core Diameter: 8 mm (Min.) |
